Modeling desulfurization of organic compounds by use of polymer membranes with the help of COMSOL Multiphysics software


This study considered the amount of Thiophene Alkane separation through the process of pervaporation by means of polymer membranes and with the help of COMSOL Multiphysics modeling. Pervaporation can be utilized for the separation of many Organic mixed. The experimental data were compared and analyzed with the model data. In this study, for the separation of Thiophene Alkane, four polymer membranes were used and the error percentage of the actual value for flux was compared to the modeling values by each membrane (PEG_PES, PDMS_PAN, PDMS, PEG). The error percentages in desulfurization by use of PEG-PES, PDMS_PAN, PDMS, PEG membranes were respectively calculated to be 0.013; 2.56; 2.90 and 0.69. 

This article is published in peer review journal and open access journal, International journal of research in engineering and innovation (IJREI) which have a high impact factor journal for more details regarding this article, please go through our journal website.






Share on Google Plus

About Editor IJREI

0 comments:

Post a Comment